 |
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
|
| If you can't view the Datasheet, Please click here to try to view without PDF Reader . |
|
|
| Datasheet File OCR Text: |
| MC10EP08 Differential 2-Input XOR/XNOR The MC10EP08 is a differential XOR/XNOR gate. The EP08 is ideal for applications requiring the fastest AC performance available. * * * * * * * * * * * 200ps Typical Propagation Delay High Bandwidth to 3 Ghz Typical PECL mode: 3.0V to 5.5V VCC with VEE = 0V ECL mode: 0V VCC with VEE = -3.0V to -5.5V Internal Input Resistors: Pulldown on D, Pulldown and Pullup on D Q Output will default LOW with inputs open or at VEE ESD Protection: >4KV HBM, >200V MM New Differential Input Common Mode Range Moisture Sensitivity Level 1, Indefinite Time Out of Drypack. For Additional Information, See Application Note AND8003/D Flammability Rating: UL-94 code V-0 @ 1/8", Oxygen Index 28 to 34 Transistor Count: 135 devices 8 http://onsemi.com 8 1 SO-8 D SUFFIX CASE 751 MARKING DIAGRAM HEP08 D0 1 8 VCC 1 ALYW A L Y W = Assembly Location = Wafer Lot = Year = Work Week D0 2 7 Q *For additional information, see Application Note AND8002/D PIN DESCRIPTION D1 3 6 Q PIN D0, D1, D0, D1 Q, Q FUNCTION ECL Data Inputs ECL Data Outputs D1 4 5 VEE TRUTH TABLE Figure 1. 8-Lead Pinout (Top View) and Logic Diagram D0 L L H H D1 L H L H D0 H H L L D1 H L H L Q L H H L Q H L L H ORDERING INFORMATION Device MC10EP08D MC10EP08DR2 Package SOIC SOIC Shipping 98 Units/Rail 2500 Tape & Reel (c) Semiconductor Components Industries, LLC, 1999 1 September, 1999 - Rev. 1.0 Publication Order Number: MC10EP08/D MC10EP08 MAXIMUM RATINGS* Symbol VEE VCC VI VI Iout TA Tstg JA JC Tsol Power Supply (VCC = 0V) Power Supply (VEE = 0V) Input Voltage (VCC = 0V, VI not more negative than VEE) Input Voltage (VEE = 0V, VI not more positive than VCC) Output Current Operating Temperature Range Storage Temperature Thermal Resistance (Junction-to-Ambient) Thermal Resistance (Junction-to-Case) Solder Temperature (<2 to 3 Seconds: 245C desired) Still Air 500lfpm Continuous Surge Parameter Value -6.0 to 0 6.0 to 0 -6.0 to 0 6.0 to 0 50 100 -40 to +85 -65 to +150 190 130 41 to 44 5% 265 Unit VDC VDC VDC VDC mA C C C/W C/W C * Maximum Ratings are those values beyond which damage to the device may occur. DC CHARACTERISTICS, ECL/LVECL (VCC = 0V; VEE = -5.5V to -3.0V) (Note 4.) -40C Symbol IEE VOH VOL VIH VIL Characteristic Power Supply Current (Note 1.) Output HIGH Voltage (Note 2.) Output LOW Voltage (Note 2.) Input HIGH Voltage Single Ended Input LOW Voltage Single Ended Min 20 -1135 -1935 -1210 -1935 VEE+2.0 Typ 28 -1060 -1810 Max 36 -885 -1685 -885 -1610 0.0 150 D D 0.5 -150 0.5 -150 Min 20 -1070 -1870 -1145 -1870 VEE+2.0 25C Typ 30 -945 -1745 Max 38 -820 -1620 -820 -1545 0.0 150 0.5 -150 Min 20 -1010 -1810 -1085 -1810 VEE+2.0 85C Typ 32 -885 -1685 Max 38 -760 -1560 -760 -1485 0.0 150 Unit mA mV mV mV mV V A A VIHCMR Input HIGH Voltage Common Mode Range (Note 3.) IIH IIL Input HIGH Current Input LOW Current NOTE: 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. 1. VCC = 0V, VEE = VEEmin to VEEmax, all other pins floating. 2. All loading with 50 ohms to VCC-2.0 volts. 3. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC. 4. Input and output parameters vary 1:1 with VCC. http://onsemi.com 2 MC10EP08 DC CHARACTERISTICS, LVPECL (VCC = 3.3V 0.3V, VEE = 0V) (Note 8.) -40C Symbol IEE VOH VOL VIH VIL Characteristic Power Supply Current (Note 5.) Output HIGH Voltage (Note 6.) Output LOW Voltage (Note 6.) Input HIGH Voltage Single Ended Input LOW Voltage Single Ended Min 20 2165 1365 2090 1365 2.0 Typ 28 2240 1490 Max 36 2415 1615 2415 1690 3.3 150 D D 0.5 -150 0.5 -150 Min 20 2230 1430 2155 1430 2.0 25C Typ 30 2355 1555 Max 38 2480 1680 2480 1755 3.3 150 0.5 -150 Min 20 2290 1490 2215 1490 2.0 85C Typ 32 2415 1615 Max 38 2540 1740 2540 1815 3.3 150 Unit mA mV mV mV mV V A A VIHCMR Input HIGH Voltage Common Mode Range (Note 7.) IIH IIL Input HIGH Current Input LOW Current NOTE: 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. 5. VCC = 3.3V, VEE = 0V, all other pins floating. 6. All loading with 50 ohms to VCC-2.0 volts. 7. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC. 8. Input and output parameters vary 1:1 with VCC. DC CHARACTERISTICS, PECL (VCC = 5.0V 0.5V, VEE = 0V) (Note 12.) -40C Symbol IEE VOH VOL VIH VIL Characteristic Power Supply Current (Note 9.) Output HIGH Voltage (Note 10.) Output LOW Voltage (Note 10.) Input HIGH Voltage Single Ended Input LOW Voltage Single Ended Min 20 3865 3065 3790 3065 2.0 Typ 28 3940 3190 Max 36 4115 3315 4115 3390 5.0 150 D D 0.5 -150 0.5 -150 Min 20 3930 3130 3855 3130 2.0 25C Typ 30 4055 3255 Max 38 4180 3380 4180 3455 5.0 150 0.5 -150 Min 20 3990 3190 3915 3190 2.0 85C Typ 32 4115 3315 Max 38 4240 3440 4240 3515 5.0 150 Unit mA mV mV mV mV V A A VIHCMR Input HIGH Voltage Common Mode Range (Note 11.) IIH IIL Input HIGH Current Input LOW Current NOTE: 10EP circuits are designed to meet the DC specifications shown in the above table after thermal equilibrium has been established. The circuit is in a test socket or mounted on a printed circuit board and transverse airflow greater than 500lfpm is maintained. 9. VCC = 5.0V, VEE = 0V, all other pins floating. 10. All loading with 50 ohms to VCC-2.0 volts. 11. VIHCMR min varies 1:1 with VEE, max varies 1:1 with VCC. 12. Input and output parameters vary 1:1 with VCC. http://onsemi.com 3 MC10EP08 AC CHARACTERISTICS (VCC = 0V; VEE = -3.0V to -5.5V) or (VCC = 3.0V to 5.5V; VEE = 0V) -40C Symbol fmax tPLH, tPHL tSKEW tJITTER VPP tr tf Characteristic Maximum Toggle Frequency (Note 13.) Propagation Delay (Diff.) 100 D, D->Q, Q Q, Q TBD TBD TBD 150 Q, Q 70 800 120 1200 170 150 80 TBD TBD TBD 800 130 1200 180 150 100 TBD TBD TBD 800 150 1200 200 ps ps mV ps Min Typ 3.0 170 240 120 Max Min 25C Typ 3.0 200 260 150 Max Min 85C Typ 3.0 220 300 Max Unit GHz ps Device Skew Part-to-Part (Note 14.) Cycle-to-Cycle Jitter Input Voltage Swing (Diff.) Output Rise and Fall Times (20% - 80%) 13. Fmax guaranteed for functionality only. VOL and VOH levels are guaranteed at DC only. 14. Skew is measured between outputs under identical transitions. http://onsemi.com 4 MC10EP08 PACKAGE DIMENSIONS SO-8 D SUFFIX PLASTIC SOIC PACKAGE CASE 751-06 ISSUE T A 8 D 5 C E 1 4 H 0.25 M B M h B C e A SEATING PLANE X 45 _ NOTES: 1. DIMENSIONING AND TOLERANCING PER ASME Y14.5M, 1994. 2. DIMENSIONS ARE IN MILLIMETER. 3. DIMENSION D AND E DO NOT INCLUDE MOLD PROTRUSION. 4. MAXIMUM MOLD PROTRUSION 0.15 PER SIDE. 5. DIMENSION B DOES NOT INCLUDE DAMBAR PROTRUSION. ALLOWABLE DAMBAR PROTRUSION SHALL BE 0.127 TOTAL IN EXCESS OF THE B DIMENSION AT MAXIMUM MATERIAL CONDITION. DIM A A1 B C D E e H h L MILLIMETERS MIN MAX 1.35 1.75 0.10 0.25 0.35 0.49 0.19 0.25 4.80 5.00 3.80 4.00 1.27 BSC 5.80 6.20 0.25 0.50 0.40 1.25 0_ 7_ q L 0.10 A1 B 0.25 M CB S A S q http://onsemi.com 5 MC10EP08 Notes http://onsemi.com 6 MC10EP08 Notes http://onsemi.com 7 MC10EP08 ON Semiconductor and are trademarks of Semiconductor Components Industries, LLC (SCILLC). SCILLC reserves the right to make changes without further notice to any products herein. SCILLC makes no warranty, representation or guarantee regarding the suitability of its products for any particular purpose, nor does SCILLC assume any liability arising out of the application or use of any product or circuit, and specifically disclaims any and all liability, including without limitation special, consequential or incidental damages. "Typical" parameters which may be provided in SCILLC data sheets and/or specifications can and do vary in different applications and actual performance may vary over time. All operating parameters, including "Typicals" must be validated for each customer application by customer's technical experts. SCILLC does not convey any license under its patent rights nor the rights of others. SCILLC products are not designed, intended, or authorized for use as components in systems intended for surgical implant into the body, or other applications intended to support or sustain life, or for any other application in which the failure of the SCILLC product could create a situation where personal injury or death may occur. Should Buyer purchase or use SCILLC products for any such unintended or unauthorized application, Buyer shall indemnify and hold SCILLC and its officers, employees, subsidiaries, affiliates, and distributors harmless against all claims, costs, damages, and expenses, and reasonable attorney fees arising out of, directly or indirectly, any claim of personal injury or death associated with such unintended or unauthorized use, even if such claim alleges that SCILLC was negligent regarding the design or manufacture of the part. SCILLC is an Equal Opportunity/Affirmative Action Employer. PUBLICATION ORDERING INFORMATION USA/EUROPE Literature Fulfillment: Literature Distribution Center for ON Semiconductor P.O. Box 5163, Denver, Colorado 80217 USA Phone: 303-675-2175 or 800-344-3860 Toll Free USA/Canada Fax: 303-675-2176 or 800-344-3867 Toll Free USA/Canada Email: ONlit@hibbertco.com Fax Response Line*: 303-675-2167 800-344-3810 Toll Free USA/Canada *To receive a Fax of our publications ASIA/PACIFIC: LDC for ON Semiconductor - Asia Support Phone: 303-675-2121 (Tue-Fri 9:00am to 1:00pm, Hong Kong Time) Email: ONlit-asia@hibbertco.com JAPAN: ON Semiconductor, Japan Customer Focus Center 4-32-1 Nishi-Gotanda, Shinagawa-ku, Tokyo, Japan 141-8549 Phone: 81-3-5487-8345 Email: r14153@onsemi.com ON Semiconductor Website: http://onsemi.com For additional information, please contact your local Sales Representative. N. America Technical Support: 800-282-9855 Toll Free USA/Canada http://onsemi.com 8 MC10EP08/D |
Price & Availability of MC10EP08
 |
|
|
|
|
All Rights Reserved © IC-ON-LINE 2003 - 2022 |
| [Add Bookmark] [Contact Us] [Link exchange] [Privacy policy] |
|
Mirror Sites : [www.datasheet.hk]
[www.maxim4u.com] [www.ic-on-line.cn]
[www.ic-on-line.com] [www.ic-on-line.net]
[www.alldatasheet.com.cn]
[www.gdcy.com]
[www.gdcy.net] |